Technical data
Creation date September 3, 2023 3:08:53 PM CEST
Catalogue status 18.08.2023 / We reserve the right to make technical changes. 2
Dimensions and weights
Depth 125 mm Depth (inches) 4.921 inch
Height 130 mm Height (inches) 5.118 inch
Width 35 mm Width (inches) 1.378 inch
Net weight 650 g
Temperatures
Storage temperature -40 °C...85 °C Operating temperature -25 °C...70 °C
Operating temperature, min. -25 °C Operating temperature, max. 70 °C
Humidity at operating temperature 5...95 %, no condensation
Input
AC input voltage range 85…277 V AC
Connection system PUSH IN with actuator
Current consumption in relation to the
input voltage
Voltage type AC
Input voltage 100 V
Input current 2 A
Voltage type DC
Input voltage 120 V
Input current 2 A
DC input voltage range 80 ... 410 V DC
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 5 A
Nominal power consumption 80.9 VA
Rated input voltage 110...240 V AC / 120...340 V DC
Recommended back-up fuse 5 A, DI / 6 A, Char. B / 6 A, Char C
Surge protection Varistor
Output
Connection system PUSH IN with actuator
DCL - peak load reserve Multiple of the rated current 150 %
Boost duration 5 s
Multiple of the rated current 400 %
Boost duration 15 ms
Nominal output current for Unom 3 A @ 60 °C
Output power 72 W
Output voltage, max. 28.8 V
Output voltage, min. 22.5 V
Output voltage, note adjustable with potentiometer or comunication module
Parallel connection option yes, max 10
Protection against inverse voltage Yes
Ramp-up time ≤ 100 ms
Rated output voltage 24 V DC ± 1 %
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
General data
AC failure bridging time @ Inom > 20 ms @ 230 V AC / >
20 ms @ 115 V AC
Conformal coating
No
Degree of efficiency 89% Derating > 60°C (2.5% / 1°C)
Earth leakage current, max. 3.5 mA Housing version Metal, corrosion resistant
Mounting position, installation notice Horizontal on DIN rail
TS 35, top and bottom
50 mm clearance for
free air flow, 10 mm
clearance to neighbouring
active subassemblies
with full load, 5 mm with
passive neighbouring
subassemblies, direct row
mounting with 90% rated
load
Power factor (approx.)
> 0.5
Power loss, idling 5 W Power loss, nominal load 8.9 W
Protection degree IP20 Short-circuit protection Yes, internal
Start-up ≥ -40 °C Surge voltage category III, II
EMC / shock / vibration
Noise emission in accordance with
EN55032 Class B
Shock resistance IEC 60068-2-27
30 g in all directions
Vibration resistance IEC 60068-2-6 2.3 g (on DIN rail), 4 g
(with direct mounting)
Insulation coordination
Insulation voltage input / earth 3.2 kV Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 3.5 kV Pollution severity 2
Protection class I, with PE connection Surge voltage category III, II
Electrical safety (applied standards)
Electrical machine equipment
Acc. to EN60204
For use with electronic equipment Acc. to EN50178 /
VDE0160
Protection against dangerous shock
currents Acc. to VDE0106-101
Protective separation / protection
against electrical shock
VDE0100-410 / acc. to
DIN57100-410
Safety extra-low voltage SELV acc. to IEC 60950-1,
PELV according to EN
60204-1
Safety transformers for switch-mode
power supplies According to EN
61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil ,
max. 12
Conductor cross-section, AWG/kcmil ,
min. 20
Conductor cross-section, flexible , min. 0.5 mm² Conductor cross-section, rigid , max. 1.5 mm²
Conductor cross-section, rigid , min. 0.5 mm² Connection system PUSH IN with actuator
Wire connection cross section, flexible
(input), max. 2.5 mm²
Connection data (output)
Conductor cross-section, AWG/kcmil ,
max. 12
Conductor cross-section, AWG/kcmil ,
min. 26
Conductor cross-section, flexible , max. 2.5 mm² Conductor cross-section, flexible , min. 0.2 mm²
Conductor cross-section, rigid , max. 2.5 mm² Conductor cross-section, rigid , min. 0.2 mm²
Connection system PUSH IN with actuator Number of terminals 4 (++ / --)
Connection data (signal)
Wire connection method PUSH IN Wire cross-section, AWG/kcmil , max. 16
Wire cross-section, AWG/kcmil , min. 26 Wire cross-section, solid , max. 1.5 mm²
Wire cross-section, solid , min. 0.14 mm²
Signalling
Floating contact
Yes
LED green/red Green: Operation (failurefree), Flashing green:
advance warning I>90%,
Green/red flashing: output
switched off (switchoff mode), Flashing red:
overload/error
Status relay (max. load) Output voltage OK (30 V
DC / 1 A)
Approbations
Certificate no. (cULus) E255651 Certificate no. (cULusEX) E470829
Institute (cULus) CULUS Institute (cULusEX) CULUSEX
Classifications
ETIM 6.0 EC002540 ETIM 7.0 EC002540
ETIM 8.0 EC002540 ECLASS 9.0 27-04-07-01
ECLASS 9.1 27-04-07-01 ECLASS 10.0 27-04-07-01
ECLASS 11.0 27-04-07-01 ECLASS 12.0 27-04-07-01
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
SCIP 6d8cdf22-8230-4af8-86c8-3558c716666d
فروشگاه برق و اتوماسیون صنعتی | فروش برق صنعتی 
هنوز بررسیای ثبت نشده است.